Appliances in Raleigh homes work hard year-round, and when something slips out of rhythm — a fridge that won’t stay cold or a washer that leaves water behind — daily routines get disrupted quickly. Local humidity and seasonal heat don’t help, often nudging machines toward early wear. Technicians at iFix Appliances see these issues every day across Raleigh, Cary, Apex and nearby areas. Their repair calls reveal clear patterns in how appliance problems begin, what homeowners usually notice first and why acting early tends to prevent bigger expenses later. Below is a condensed look at the trouble spots they encounter most often.

Frequently Asked Questions (FAQs)

Refrigerator Repair

Why is my refrigerator warm but the freezer is cold?
A fridge can stay warm while the freezer stays cold if the evaporator fan isn’t circulating air. Dirty condenser coils or a failed damper control may also cause uneven temperatures. Check that vents aren’t blocked and that the fan is running. If the problem persists, a technician can test the fan motor and temperature sensorsifixappliancesnc.com.

Is water under my refrigerator normal?
Small droplets around the defrost drain might occur during normal cycles, but puddles aren’t normal. Water leaks often come from a clogged defrost drain or a cracked water supply line. Clearing the drain or replacing the line usually resolves the issue. Ignoring leaks can damage flooring and baseboardsifixappliancesnc.com.

My fridge keeps running — is that bad?
If the compressor runs constantly, it may indicate dirty coils, a failing thermostat or a door gasket that doesn’t seal. Continuous operation wastes energy and shortens the compressor’s life. Cleaning coils and checking seals can help, but recurring issues warrant professional diagnosisifixappliancesnc.com.

What should I do if my ice maker stops making ice?
First, check if the water line is kinked or the filter is clogged. Ensure the freezer temperature is below 10 °F; warmer settings can halt ice production. If these steps don’t help, the inlet valve or ice maker assembly may need replacementifixappliancesnc.com.

When is refrigerator repair not worth it?
Generally, if your refrigerator is over 12–15 years old and uses outdated refrigerants or if repairs exceed half the cost of a new unit, replacement may be more economical. A professional can provide an estimate after diagnosis.

Washer Repair

Why won’t my washer start?
Common reasons include a defective lid switch, a faulty control board or a tripped circuit breakerifixappliancesnc.com. Make sure the outlet has power and the lid is fully closed. If the machine still won’t start, it’s best to have a technician test electrical components.

What causes a washer not to drain?
The drain pump or hose might be blocked by lint, coins or small itemsifixappliancesnc.com. Unplug the machine, locate the pump filter (usually near the bottom) and clear any debris. If the pump motor has failed, it may need professional replacement.

Why does my washer shake and make loud noises?
Excessive vibration may come from an unbalanced load, worn shock absorbers or bearingsifixappliancesnc.com. Try redistributing clothes and ensuring the washer sits level. Persistent banging or screeching warrants a service call to prevent damage to the drum or motor.

How can I prevent mold in my front‑load washer?
Leave the door ajar after cycles, wipe the gasket dry and run a monthly cleaning cycle with a washer cleaner or a vinegar‑baking soda solutionifixappliancesnc.com. Regular maintenance reduces musty smells and mildew growth.

Is it safe to fix a washer myself?
While clearing a clogged hose is a simple DIY task, electrical and mechanical repairs can be risky. Attempting to disassemble panels without proper training can cause injury or further damage. Certified technicians have the tools and experience to diagnose issues safely.

Dryer Repair

Why does my dryer take forever to dry clothes?
A long cycle often indicates a blocked vent or a failing heating elementifixappliancesnc.com. Check and clean the lint filter after each load and have your vent professionally cleaned at least annually. If drying time remains excessive, a technician should inspect the heating coil and thermostat.

Is it okay to run my dryer if it makes a squeaking or thumping sound?
Unusual noises suggest worn bearings, rollers or beltsifixappliancesnc.com. Continued use can lead to motor failure or a broken drum. Stop using the dryer and schedule a repair to prevent further damage.

My dryer isn’t heating at all — what’s wrong?
Possible causes include a blown thermal fuse, a faulty heating element or a defective thermostatifixappliancesnc.com. Because dryers combine heat and electricity, it’s safer to have a professional test and replace these parts.

Why does my dryer smell like something is burning?
A burning odor often means lint has accumulated near the heating element or ventifixappliancesnc.com. Turn the dryer off immediately and disconnect it from power. Clean the vent and lint trap thoroughly. If the smell persists, call a technician — continuing to use the dryer could start a fire.

How often should I have my dryer inspected?
Annual inspection is recommended. Regular maintenance reduces fire risk and keeps the appliance running efficientlyifixappliancesnc.com.

Oven & Stove Repair

Why does my oven turn on but not heat up?
A broken bake element or faulty igniter is frequently the causeifixappliancesnc.com. For electric ovens, inspect elements for blisters or breaks and test for continuity. For gas models, check whether the igniter glows but fails to light within 90 secondsifixappliancesnc.com.

Is it safe to continue using my oven if temperatures seem off?
An inaccurate temperature can stem from a faulty sensor or thermostatifixappliancesnc.com. Continuing to use the oven may lead to undercooked food or overheating. Calibrating or replacing the sensor is usually straightforward, but a technician can verify resistance values and install the correct part.

What causes uneven baking or hot spots?
Worn door gaskets allow heat to escape, and malfunctioning convection fans may circulate air poorlyifixappliancesnc.com. Replacing the gasket and testing fan motors typically resolves uneven heat distribution.

Can I reset my oven to fix a glitch?
Yes. Unplugging the oven for a few minutes or flipping the circuit breaker can reset the control boardifixappliancesnc.com. This may resolve minor glitches. If problems persist, further diagnosis is needed.

When should I replace rather than repair my oven?
If the oven is over 15 years old, has recurring control board failures or parts are no longer available, replacement may be more cost‑effective. Otherwise, repairing a malfunctioning element or thermostat is usually less expensive than buying a new appliance.

Dishwasher Repair

Is it normal for dishwashers to make noise?
Soft humming and swishing noises are typical, but loud grinding, squealing or rattling aren’tifixappliancesnc.com. Persistent unusual sounds should be investigated to avoid pump or motor failure.

Can I still run my dishwasher if it’s making strange noises?
Doing so is risky. Continuing to operate a noisy dishwasher could damage the pump or motor and may lead to leaksifixappliancesnc.com. Shut it off and inspect for loose utensils or clogged components. If noises persist, call a technician.

Why does my dishwasher make a grinding or buzzing sound?
Grinding often means foreign objects — like seeds, bones or glass — are stuck in the chopper blade or pumpifixappliancesnc.com. Buzzing can also signal a failing motor. Removing debris may solve the issue, but a professional can safely disassemble and clean the pump.

What causes rattling or clanking?
Loose utensils or improperly loaded dishes can cause rattlingifixappliancesnc.com. If rearranging items doesn’t silence the noise, spray arms or internal parts might be loose and need tightening or replacement.

How much does it cost to repair a noisy dishwasher?
Minor fixes such as clearing debris may cost around $150–$250, while motor or pump replacements can reach $400–$600ifixappliancesnc.com. Addressing noises early keeps costs lower.

Ice Maker & Freezer

Why is my freezer too warm while my fridge section is cold?
A malfunctioning defrost system or a broken evaporator fan can leave the freezer warm even when the fridge seems fineifixappliancesnc.com. Frost on the evaporator coils may block airflow. Defrosting the freezer and checking the fan can help, but a technician may need to test the defrost timer or heater.

What causes ice buildup inside my freezer?
Ice buildup often stems from warm, humid air entering through a damaged door gasketifixappliancesnc.com. A clogged defrost drain or faulty defrost heater can also allow frost to accumulate. Replacing the gasket and clearing the drain usually fixes the problem.

Why isn’t my ice maker producing ice?
Clogged water filters, kinked supply lines or a failed water inlet valve will halt ice productionifixappliancesnc.com. Make sure the freezer temperature is cold enough and replace filters regularly. If the mechanism is broken, the ice maker assembly may need replacing.

How can I speed up slow ice production?
Keeping the freezer at the recommended 0 °F and changing the water filter every six months can improve production. Clearing any kinks in the supply line also helps. If cubes are still slow or hollow, the inlet valve may be failing.ifixappliancesnc.com

When should I call a technician for ice maker issues?
If basic troubleshooting doesn’t restore ice production, or if you notice leaks or frost throughout the freezer, a professional can inspect the fill valve, thermostat and control module. Delaying service can lead to larger cooling problems and higher utility bills.

Conclusion

Appliance breakdowns never happen at a good time, and Raleigh’s busy households rely on their fridges, washers, dryers, ovens and dishwashers almost daily. The problems outlined above — from warm refrigerators to noisy dishwashers — illustrate how small issues can signal bigger underlying faults. While it’s tempting to ignore strange sounds or slow performance, doing so can lead to costly repairs, spoiled food or even safety hazards. iFix Appliances’ experience in the Raleigh area underscores the value of prompt diagnostics and informed decisionsifixappliancesnc.com. Paying attention to early warning signs and practicing basic maintenance — cleaning lint traps, checking gaskets and keeping vents clear — can extend appliance life. When in doubt, a trained technician can help you decide whether a repair makes sense or if replacement is the wiser choice.

📞 Call iFix Appliances today or book online to get your oven heating like new — just in time for the holidays!